Diagnostics Operations
Diagnosis
39
3. Select a parameter item on the left column, or enter the item
name in the Search bar.
4. Tap on the right side of the
MIN
button, and enter the required
minimum value.
5. Tap on the right side of the
MAX
button, and enter the required
maximum value.
6. Tap the
ON/OFF
button on the right side of the Buzzer Alarm
button to turn it on or off.
7. Tap
Done
to save the setting and return to the Live Data
screen; or tap
Cancel
to exit without saving.
If the threshold limits are successfully set, two horizontal lines now
appear on each of the data graphs (when Waveform Graph Mode is
applied) to indicate the alarming point. The threshold lines are shown
in different colors than the waveform of the parameters for distinction.
Record Button
– displays the configuration screen for Record
Setting, on which you can set the trigger type, duration and trigger
point for the data recording function.
a)
Trigger Type
– sets the trigger mode for data recording,
mainly of two kinds: Manual and Auto. There are four options
available:
1)
Manual
– allows you to manually start and stop data
recording
2)
DTC
– auto triggers data recording when any DTC is
detected
3)
DTC Check Mode
– auto triggers data recording when
certain pre-selected DTC types are detected
4)
Parameter
– auto triggers data recording when any
parameter value reaches the preset threshold
b)
Duration
– sets the recording time (for Auto trigger mode only)
c)
Trigger Point
– reserves a relative percentage of a record
length before the data recording start point for reference (for
Auto trigger mode only)
