Diagnostics Operations
Diagnosis
38
Setting
– tapping this button opens a setting screen, which allows you to
set the trigger mode, recording duration, and various threshold values for
data recording, and make other controls.
Figure 4-11
Sample Setting Mode in Live Data
There are four navigation buttons on top of the
Setting
mode screen.
Range Button
– displays the configuration screen on which you can
set the threshold values, an upper limit and a lower limit, for
triggering the buzzer alarm
.
This function is only applied to the
Waveform Graph display mode.
a)
MIN
– tapping which opens a virtual keyboard, allows you to
enter the required lower limit value
b)
MAX
– tapping which opens a virtual keyboard, allows you to
enter the required upper limit value
c)
Buzzer Alarm
– switches the alarm on an d off. The alarm
function makes a beep sound as a reminder whenever the data
reading reaches the preset minimum or maximum point
To set threshold limits for the parameter values
1. Tap the
Setting
functional button at the bottom of the Live Data
screen.
2. Tap the
Range
navigation button.
