Getting Started
Installing Computer Software
14
3.3 Installing Computer Software
The MaxiSys Diagnostic Platform allows you to realize some of its functions
on a c omputer to enhance capabilities and i mprove user experience. To
realize these functions on a computer, you need to install certain software.
There are two Setup.exe program packages contained in the CD provided
with the MaxiSys tool kit. The packages include the following applications:
1.
PC Link
- launches a Printing Services program which receives and
allows editing the files sent from the MaxiSys tablet for printing
To install the Setup.exe program
1. Insert the CD into the CD-ROM of the computer. The driver
installation wizard will load momentarily.
2. Click on
Next
on the welcome page.
3. Click the
Change
button, and select a destination folder to install the
program, and click
Next
to continue. Or directly click
Next
to
continue without changing the default installation folder.
4. Click
Install
and the Setup.exe program will be installed onto the
computer.
3.3.1 Printing Operation
This section describes how to receive file from the display tablet and perform
printing through the computer:
To perform printing through the computer
1. Install the PC Link (Printing Services program) to the computer.
2. Make sure the display tablet is connected to the computer network,
either via Wi-Fi or LAN, before printing. See
on
65 for more information.
3. Run the Printing Services program on the computer.
4. Tap the
button on the toolbar displayed in various applications
of the MaxiSys system. A temporary file will be created and sent to
