manualshive.com logo in svg

AUSA D 1000 AP, Operator'S Manual

Share
Download
AUSA D 1000 AP Operator'S Manual Download Page 40

D 900 AP / D 1000 AP / D 1000 APG

38

(fi

 g. 

3)

(fi

 g. 

2)

(fi

 g. 

1)

Periodic 

maintenance 

operations

1.- Engine

For operation instructions, a list of spare parts and for general maintenance consult the 
engine manual or the 

LUBRICATION AND MAINTENANCE CHART

 of this Manual.



Alternator belt

Periodically check the tension in the alternator belt. Also check for cracks or other 
damage. Contact an AUSA dealer for replacement of the alternator belt.

2.- FUEL CIRCUIT

Current regulation in regard to exhaust emissions demands that the values of the exhaust 
emission components are kept below the maximum limits authorised by the regulations 
throughout the useful life of the machine. Consequently, the engine maintenance plan 
must be carefully followed, with special attention given to the quality and purity of the 
fuel used, to the cleaning of filters and generally to the maintenance of the complete fuel 
circuit.

CAUTION:

Never mix oil with fuel. This vehicle has a 4-stroke engine. Oil must be added to the 
engine base only.
Use automotive clean diesel (class A), which preferably meets 98/70/CEE standard 
amended by standard 2003/17 or the equivalent EN 590 standard.
In Spain RD 1728/1999 applies.
For the USA market, it must meet Grades 1D and 2D of the ASTM D975 standard, in 
supplies which do not meet these standards, the sulphur content should never exceed 
0.5% mass.
In principal, the use of REM type biodiesel or similar is not recommended. In case of use, 
the proportion used should not exceed 5% of the fuel mix.



Fuel level (fig. 1, 2)

The fuel tank is located on the right side of the engine compartment.
There is an indicator dial which shows the approximate amount of fuel in the tank.

a. Fuel level indicator dial.
b. Fuel filling cap.



Draining water from the filter element (fig. 3)

The fuel used in this vehicle may contain water which is deposited at the bottom of the 
filter element. It is vitally important for the protection of the engine injection system to 
drain the water from the filter element at the frequency indicated in the 

LUBRICATION 

AND MAINTENANCE CHART

.

Loosen the drain 

(c)

 located at the bottom of the filter. Wait until all water has been 

released and retighten the drain.

WARNING!!

Take care to correctly loosen the drain 

(c)

 otherwise the fuel system could take in air 

causing engine failure.

a

a

b

c

Summary of Contents for D 1000 AP









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands