AUSA D 1000 AP, Operator'S Manual

Page: 18 / 72

D 900 AP / D 1000 AP / D 1000 APG
16
(fi
g.
4)
(fi
g.
1)
(fi
g.
2)
(fi
g.
3)
IMPORTANT!
Please indicate model number, date of purchase and frame and serial number when
consulting AUSA or your dealer for any matter
Model, purchase date, chassis number and engine number. These details are marked
on the identification plate.
We recommend you make a record of these numbers in the spaces provided below for
handy reference and keep it in your files.
Dumper model: ....................................................................
Date of purchase:.................................................................
Frame number: .....................................................................
Engine number: ....................................................................

The machine’s identification plate (fig. 1) is located on the front part of the
engine protector (behind the gear stick). It includes the CE trademark.

The frame number (fig. 2) is marked on the front part of the right side of the
chassis.

The engine number (fig. 3 and 4) is marked on the left side of the block behind
the fuel filter and on a label on the upper part of the valve cover.
 The ROPS arch homologation plate (fig. 5) is located in the lower right post
of the arch .

Main component identification plates
Identification plates for all components not manufactured by AUSA, such as: engines,
pumps, etc. are attached to the components themselves, in the positions where the
respective manufacturers originally fitted them.
How to identify
your dumper
(fi
g.
5)