manualshive.com logo in svg

AUSA D 1000 AP, Operator'S Manual

The AUSA D 1000 AP Operator's Manual is the essential guide for maximizing the potential of your machine. Unlock its full capabilities by downloading the manual for free from our website, where you can find a comprehensive resource to enhance your understanding and operation of this incredible product.

Share
Download
background image

D 900 AP / D 1000 AP / D 1000 APG

26

Break in period



Engine

The engine in this dumper requires a break in period of 50 hours before operating the 
vehicle at full load.

CAUTION:

This dumper has a 4-stroke engine. Oil must be added to the engine base only.
During this period, maximum throttle should not exceed 3/4 of the pedal movement.
However, brief full acceleration and speed variations contribute to a good break in. 
Continued wide open throttle accelerations, prolonged cruising speeds and engine 
overheating are detrimental during the break in period.



First inspection (50 hours)

As with any precision part of a mechanical element, we suggest that after the first 50 
hours or 30 days from purchase, whichever is reached first, the dumper is inspected by 
an authorised AUSA dealer. This inspection will give you the opportunity to discuss the 
unanswered questions you may have encountered during the first hours of operations.

Summary of Contents for D 1000 AP









































































Reviews:

No comments

Related manuals for D 1000 AP

Brands by name

Popular brands

Load more brands