Aumuller KS4 S12 24V DC R, Assembly And Commissioning Instructions

Page: 28 / 36

28
Assembly Instruction
KS 4 S12 24V DC
e
leCtriC ConneCtion
Make sure when establishing the connection
that there is no voltage at the terminals!
Unused wires must be safely insulated!
I
nstallatIon step
10: e
leCtriC ConnetCtion
Multi-drive operation with master and slave Multi-drive operation with M-COM
from control unit
from control unit
+
+
-
-
+
+
-
-
master
drive 1
slave
drive 2
BN
BN
BU
BU
24 V DC control
24 V DC control
WH
WH
AK AK
AK AK
junction box
site-supplied
junction box
site-supplied
!
Connection assignment
BN
VT
WH
GN
BU
AK
WH is used for communication
(in systems with synchronized
multi-drive operation)
Standard
CLOSE / Optional OPEN :
contact max. 24 V, 500 mA
(min. 10mA)
M-COM
Direction of travel
OPEN
CLOSE
Polarity reversal
+
+
-
-
Wire colour coding
Wire colour coding DIN IEC 757
blake BK
white WH
brown BN
blue BU
green / yellow GN / YE
green GN
violet VT
grey GY
BN
+
-
BU
-
+
WH connection.
Drives do not work, if not connected.
!
WH connection.
Drives do not work, if not connected.
The running direction of the drive may be changed by
interchanging (polarity reversal) the wires
„BN – (brown)“
- „BU – (blue)“ .
07 07
polarity
reversal
polarity
reversal
+
+
-
-
WH is used for communication, with synchronized multi-drive
operation.
Optional: 1 to 4 drives and max. 2 locking drives are possible.
The programming of the drives in multi-drive occurs at factory or on
site with UniPC
WH is used for communication, with synchronized multi-drive
operation.
Optional: 1 to 4 drives and max. 2 locking drives are possible.