Aumuller KS4 S12 24V DC R, Assembly And Commissioning Instructions

Page: 27 / 36

27
Assembly Instruction
KS 4 S12 24V DC
07
C
able routinG
-
on the CaSement or frame
nsK HsK
I
nstallatIon step
9:
Cable routing on the frame
FL
AK
RA
RA
Ks4
Ks4
K134
„
Route cable on the frame or mullion/transom.
Cable must be protected against damage (shearing-off,
kinking, splitting).
cable duct glued on
(in addition secured with
countersunk screws against
breaking away)
Cable on casement Cable in glazing bead
Connection cable routing on the casement:
• Cable must be protected against damage (shearing-off, kinking,
splitting), i.e. by using bushings.
Upon removal of the glazing bead is the dan-
ger that the glass may fall.
!
Cable routing on or in the casement
Cable crossover without
protective cable hose
Cable crossover with
protective cable hose
Connection cable routing on the hinge side:
• Make sure that during opening or closing procedure the cable will
not be damaged by shearing-off, kinking, crushing.
• Protect cable feedthrough in profile e.g. by using cable bushings,
cable transitions.
RA RA FL
BD protective cable
hose BD AK
FL
RA RA FL FL
Cable duct glued on
(in addition secured with
countersunk screws against
breaking away). Drill hole in glazing bead
(cable bushing protects against
damage to cable).
C
able routing