background image

3

Assembly Instruction
KS 4 S12 24V DC

01

Once the assembly and commissioning 
has been completed, the installer of a 
machine „power-operated window and 
door“ shall hand these instructions over 
to the end-user. The end-user shall store 
these instructions in a safe place for fur-
ther reference and use, if required. 

!

w

arninG

Index of abbreviations

These abbreviations are used consistently throughout these assembly 
& operating instructions. Unless stated differently, all dimensions indi-
cated in this document are in mm. General tolerances in accordance 
with DIN ISO 2768-m.

A

drive

AK 

connection cable / drive cable

AP

cover cap

BD

hinge

Fxxx

casement bracket

FAB

overall width of casement

FAH

overall height of casement

FG

casement weight

FL

casement

casement overlap

HSK

main closing edge

Kxxx

frame bracket

L

construction lenghth of drive

MB

central hinge

NRWG

NSHEV – natural smoke and heat exhaust ventilation

NSK

side closing edge

RA

frame

RAB

overall width of frame

RAH

overall height of frame

RWA

SHEV – smoke and heat exhaust ventilation

SL

snow load
opening direction

a

bbreViationS

Failure to comply with the warning notes results  
in irreversible injuries or death.

Failure to comply with the warning notes can re-
sult in irreversible injuries or death.

Failure to comply with the warning notes can re-
sult in minor or moderate (reversible) injuries.

Failure to comply with the warning notes can lead 
to damage to property.

w

arninG

 

anD

 

Safety

 

SymbolS

 

in

 

theSe

  i

n

-

StruCtionS

:

The symbols used in the instructions shall be strictly observed and have 
the following meaning:

Caution / Warning

Danger due to electric current.

Caution / Warning

Risk of crushing and entrapment during device 
operation (is provided as a sticker with the drive).

Attention / Warning

Risk of damage to / destruction of drives and / or 
windows.

!

w

arninG

!

D

anGer

!

C

aution

n

ote

!

These instructions are intended for trained personnel 
and operators of systems for natural smoke ventilation
(NRA / RWA) (natural smoke exhaust system / smoke and 
heat exhaust system) and natural ventilation via windows, 
who are knowledgeable of operating modes as well as the 
remaining risks of the system.

This device is not intended for use by per-
sons (including children) with physical, 
sensory or mental limitations or lacking 
experience and / or knowledge, unless 
they are supervised by a person who is 
responsible for the safety or were instruc-
ted by him on the usage of this equip-
ment. Children should be supervised to 
ensure that they are not playing with this 
device. 
Cleaning and operator’s maintenance
may not be performed by children with-
out supervision.

t

arGet

 

Group

!

w

arninG

RA

FL

FAB

FA

H

BD

HSK

NSK

NSK

RAB

R

A

H

P

reliminary

 r

emark

Summary of Contents for KS4 S12 24V DC R





































Reviews: