Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting ) of actuator controls ACVExC 01.2 Modbus
●
Manual (Fieldbus device integration) of actuator controls ACVExC 01.2 Modbus
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents
Page
1.
Safety instructions.................................................................................................................
1.1.
Basic information on safety
1.2.
Range of application
1.3.
Warnings and notes
1.4.
References and symbols
2.
Identification...........................................................................................................................
2.1.
Name plate
2.2.
Short description
3.
Transport, storage and packaging........................................................................................
3.1.
Transport
3.2.
Storage
3.3.
Packaging
4.
Assembly................................................................................................................................
4.1.
Mounting position
4.2.
Handwheel fitting
4.3.
Multi-turn actuator: mount to valve/gearbox
4.3.1.
Output drive type A
4.3.1.1.
Stem nut: finish machining
4.3.1.2.
Multi-turn actuator (with output drive type A): mount to valve
4.3.2.
Output drive types B
4.3.2.1.
Multi-turn actuator with output drive types B: mount to valve/gearbox
4.4.
Accessories for assembly
4.4.1.
Stem protection tube for rising valve stem
4.5.
Mounting positions of local controls
4.5.1.
Mounting positions: modify
5.
Electrical connection.............................................................................................................
5.1.
Basic information
5.2.
KP/KPH electrical connection
5.2.1.
Terminal compartment: open
5.2.2.
Cable connection
2
SAVEx 07.2 – SAVEx 16.2 / SARVEx 07.2 – SARVEx 16.2 Control unit: electronic (MWG)
Table of contents
ACVExC 01.2 Non-Intrusive Modbus RTU
