Table 21: Important push button functions for menu navigation
Functions
Navigation sup-
port on display
Push buttons
Change screen/selection
Up ▲
[1]
Change values
Enter figures from 0 to 9
Change screen/selection
Down ▼
[2]
Change values
Enter figures from 0 to 9
Confirm selection
Ok
[3]
Save
Save
Enter <Edit> menu
Edit
Display more details
Details
Enter Main menu
Setup
[4] C
Cancel process
Esc
Return to previous display
Backlight
●
The display is illuminated in white during normal operation. It is illuminated in
red in case of a fault.
●
The screen illumination is brighter when operating a push button. If no push
button is operated for 60 seconds, the display will become dim again.
6.3.1.
Menu layout and navigation
Groups
The indications on the display are divided into 3 groups:
Figure 48: Groups
[1]
Startup menu
[2]
Status menu
[3]
Main menu
ID
Status menu and main menu are marked with an ID.
Figure 49: Marking with ID
S
ID starts with
S
= status menu
M
ID starts with
M
= main menu
Group selection
It is possible to select between status menu
S
and main menu
M
:
For this, set selector switch to 0 (OFF), hold down push button C for approx. 2
seconds until a screen containing the ID
M...
appears.
Figure 50: Select menu groups
You return to the status menu if:
49
SAVEx 07.2 – SAVEx 16.2 / SARVEx 07.2 – SARVEx 16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive Modbus RTU
Operation
