AUMA ACVExC 01.2 Series, Operation Instructions Manual

Page: 3 / 112

30 5.2.3. Fieldbus cables: connect
31 5.2.4. Terminal compartment: close
32 5.3. KES electrical connection
33 5.3.1. Terminal compartment: open
34 5.3.2. Cable connection
35 5.3.3. Fieldbus cables: connect
36 5.3.4. Terminal compartment: close
37 5.4. KT/KM electrical connection
38 5.4.1. Terminal compartment: open
39 5.4.2. Cable connection
41 5.4.3. Fieldbus cables: connect
42 5.4.4. Terminal compartment: close
43 5.5. External earth connection
44 5.6. Accessories for electrical connection
44 5.6.1. Actuator controls on wall bracket
44 5.6.2. Parking frame
46 6. Operation................................................................................................................................
46 6.1. Manual operation
46 6.1.1. Engage manual operation
46 6.1.2. Manual operation: disengage
47 6.2. Motor operation
47 6.2.1. Local actuator operation
48 6.2.2. Actuator operation from remote
48 6.3. Menu navigation via push buttons (for settings and indications)
49 6.3.1. Menu layout and navigation
50 6.4. User level, password
50 6.4.1. Password entry
51 6.4.2. Password change
51 6.5. Language in the display
52 6.5.1. Language change
53 7. Indications..............................................................................................................................
53 7.1. Indications during commissioning
53 7.2. Indications in the display
54 7.2.1. Feedback indications from actuator and valve
56 7.2.2. Status indications according to AUMA classification
57 7.2.3. Status indications according to NAMUR recommendation
59 7.3. Indication lights of local controls
60 7.4. Optional indications
60 7.4.1. Mechanical position indication via indicator mark
60 7.4.2. Mechanical position indication (self-adjusting)
61 8. Signals (output signals).........................................................................................................
61 8.1. Status signals via output contacts (digital outputs)
61 8.1.1. Assignment of outputs
61 8.1.2. Coding the outputs
61 8.2. Analogue signals (analogue outputs)
62 9. Commissioning (basic settings)...........................................................................................
62 9.1. Type of seating: set
63 9.2. Torque switching: set
64 9.3. Limit switching: set
3
SAVEx 07.2 – SAVEx 16.2 / SARVEx 07.2 – SARVEx 16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive Modbus RTU
Table of contents