84
FM RADIO
OPERATING IN FM MODE
1. Carefully adjust the rod antenna and press the Power button to switch on Audisse Shirudo.
2. Press the Source button as needed to select FM radio mode.
3. Rotate the Tuning/Seek/Select control in a clockwise direction. The displayed frequency
will increase. Press the Tuning/Seek/Select control to carry out an auto-tune. Your radio will
scan up the FM band from the currently displayed frequency and will stop scanning when it
finds a station of sufficient strength.
4. The display will show the frequency of the signal that has been found. If RDS information
is available, after a few seconds the display will show the radio station name.
If you only hear hiss or interference, simply press the Tuning/Seek/Select control to scan
further. Audisse Shirudo may have found a spurious interference signal.
5. To find more FM stations press the Tuning/Seek/Select control to repeat the scan
operation. To scan down in frequency, rotate the Tuning/Seek/Select control in a anti-
clockwise direction first and then press the control. Your radio will scan down the FM band
from the currently displayed frequency and will stop scanning when it finds a signal of
sufficient strength.
6. When the end of the waveband is reached Audisse Shirudo will recommence tuning from
the opposite end of the waveband.
7. Use the Volume/EQ control to adjust the sound level as needed.
SOURCE
MENU
FWD.
BACK
INFO
TUNING
SEEK/SELECT
VOLUME
EQUALIZER
PRESET
PRESET
-
PRESET
+
FM
radio
)
)
)
FM
101.00 MHz
FM radio
10:02
SOURCE
MENU
FWD.
BACK
INFO
TUNING
SEEK/SELECT
VOLUME
EQUALIZER
PRESET
PRESET
-
PRESET
+
Sky Radio 101FM
FM radio
10:02