16
GETTING STARTED
INSTALLATION USING THE “SETUP WIZARD”
Place Audisse Shirudo on a flat surface and plug the cable from the mains adaptor into the
DC input socket located at the rear of Audisse Shirudo (marked ‘DC in’) ensuring that the
plug is pushed fully into the socket.
Plug the mains adaptor into a wall socket and switch on the socket.
IMPORTANT: The mains adaptor is used as the means of connecting the radio to the mains
supply. The mains socket used for the radio must remain accessible during normal use. In
order to disconnect the radio from the mains, the mains adaptor should be removed from the
mains socket outlet completely.
When you apply power, the display on the sound system will light up and say: ‘Audisse
Shirudo’.
After a few seconds the radio will then enter Standby and the clock will display ‘00:00’ as
shown.
To continue to setup Audisse Shirudo press the Power button. If this is the first time that you
use Audisse Shirudo (or after a Factory Reset) the display will show ‘Setup wizard’ and ‘YES’
will be highlighted on the screen.
audisse
shirudo
START UP
00 / 00 / 0000
00:00
SOURCE
MENU
FWD.
BACK
INFO
TUNING
SEEK/SELECT
VOLUME
EQUALIZER
PRESET
PRESET
-
PRESET
+
Start now ?
Setup wizard
YES
NO
