audisse Shirudo Instruction Manual Download Page 66

Page: 66 / 128

3. To remove servers that are no longer required rotate the Tuning/Seek/Select control until

‘YES’ is highlighted on the display. Press the control to cause the servers to be removed.

4. If you do not wish to prune servers rotate the Tuning/Seek/Select control to highlight ‘NO’

and press the control to confirm.

USING USB MEMORY DEVICES

This section describes how to use your radio to access and playback your audio files via USB

memory devices.

USB memory devices plug into the rectangular slot on the top of your radio on the left hand

side.

Important: Your radio is only designed to work with USB flash memory devices. It is not

intended to be connected to hard disk drives or any other type of USB device.

The Shirudo radio has been tested with a range of USB memory devices of up to 128GB

capacity. USB memory must use the FAT or FAT 32 filing system in order to operate with your

radio. Your radio is unable to play from media formatted using the exFAT or NTFS formats.

It is possible to use SD or SDHC cards for media storage and playback when held in a

suitable USB adaptor. However, due to the wide variation of such adaptors, it is not possible

to guarantee that all adaptor / card combinations will work in the radio.

Audio formats supported are MP3, WMA, AAC, FLAC and WAV. USB playback does not

support files encoded using WMA Lossless, WMA Voice, WMA 10 Professional, nor files of

any format, which have DRM protection.

Recommendations:

Unless you have only a few files on the USB memory device, do not place all files in the root

folder.

The number of items (files / sub-folders) in any folder should be less than 2000.

Searching and playback will be more responsive if the number of files in any one folder is

limited (we suggest not more than 250).

It is recommended that the USB memory is reformatted in your computer before adding your

music files.

Prune shared media

wake on LAN servers?

Prune servers

YES

Twonky Server

myMusic Station

Shared media

Summary of Contents for Shirudo

































































































































Search results

Summary of Contents for Shirudo

Reviews:

Related manuals for Shirudo

Brands by name

Popular brands

audisse Shirudo, Instruction Manual

Search results

Summary of Contents for Shirudo

Reviews:

Related manuals for Shirudo

Brands by name

Popular brands