background image

21

‘Setup wizard completed’. Press the Tuning/Seek/Select control to exit the setup wizard.

 

7. If your network is configured without an encryption key, the screen should say 

‘Connecting...’, and then ‘Setup wizard completed’. Press the Tuning/Seek/Select control to 

exit the setup wizard and show the Main menu. If this is the case then you have successfully 

connected Audisse Shirudo to your network.

8. If the screen displays ‘Key:’, it is because the network is using one of the encryption 

systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to 

enter the correct WEP or WPA key into the sound system to allow it to communicate with your 

wireless network. If you do not have the WEP or WPA key, then you should obtain it from the 

person who set up your network. Some wireless routers may come with an encryption key 

already set up by the supplier, in which case you should refer to the documentation provided 

with it. WPA is used here to also include WPA2.

WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless routers can 

also use pass-phrases for WEP but these are not supported by the sound system. WPA keys 

are usually set up using a pass-phrase of between 8 and 63 characters. Audisse Shirudo 

accepts pass-phrases for WPA keys.

9. To enter the WEP or WPA key, characters are selected and entered using the Tuning/Seek/

Select control. As you rotate the control, the highlight scrolls through the available characters 

as well as the three controls on the right. The character currently highlighted will be entered 

when you press the Tuning/Seek/Select control. 

     

              

Do this as needed until the complete key has been entered. Remember, WEP keys only use 

the numbers 0-9 and letters A-F. WPA keys are sensitive to upper and lower case characters. 

You must enter the key exactly or the sound system will not connect to the network.

Please wait

Connecting ...

Network settings

0123456789 . _ - @ ,

       abcdefghijklmn

opqrstuvwxyz ABC

DEFGHIJKLMNOPQR

Key

BKSP

OK

CANCEL

SOURCE

MENU

FWD.

BACK

INFO

TUNING

SEEK/SELECT

VOLUME

EQUALIZER

PRESET

PRESET

 

-

PRESET

 

+

0123456789 . _ - @ ,

       abcdefghijklmn

opqrstuvwxyz ABC

DEFGHIJKLMNOPQR

Key

BKSP

OK

CANCEL

Wilson12345

Summary of Contents for Shirudo

































































































































Reviews: