11
3.3
DRC MP REMOTE CONTROL (Optional)
When the DRC MP is connected to an Audison bit Play HD
(see section 4.2.3)
, the DRC MP “
Navi Command
” function is
enabled. When activated, the player menu can be browsed with the use of the multi-function Joystick and the available
keys, like when using the remote control.
This menu enables the user to set the time for the player stand-by
mode, after the turn off signal has been sent to the “Remote-In”. By
default it is set to fifteen minutes, but it can be set to 1 to 60 minutes or
disabled. This function ensures that the bit Play HD restart time drops
to zero in case of temporary lack of power supply (i.e. start&stop
vehicles or similar), pausing the tracks being reproduced and starting
them again when the ignition is on.
3.3.1
NAVI COMMAND
3.3.2
BIT PLAY HD SETTINGS
Press
to
go back to main Menu
Press to activate
NAVI COMMAND
menu
Available only with
bit Play HD
connected
3 sec
3 sec
“bit Play HD” menu active
NEXT TRACK
PLAY; PAUSE
STOP
PREV TRACK
By enabling the Navi Command function through the DRC MP, it is
possible to interact with the bit Play HD connected to the system.
With this menu it is possible to operate in the same way as with the
remote control supplied with the bit Play HD, to access all the main
navigation menu features through the DRC MP joystick.
Menu
Left
Menu Down
ESC
ENTER
Volume -
Menu
Right
+
-
Menu UP
Press
ESC
to go back to main Menu
USER’S MANUAL
bit Play HD /
3
