57
MALFUNCTION
POWER
The bit Play HD does not turn on.
1.
Check the charge level of your car battery. If the power is
low, it is necessary to recharge the battery.
2. Check the integrity of the 3 Amp fuse in the product side panel.
3. Make sure the “+” (red wire) and “-” (black wire) terminals
are connected properly and that there is a 12V nominal
voltage when the car is off.
4. Make sure that the “REM IN” terminal (blue wire) is properly
connected to a power consent terminal of the audio system.
The bit Play HD logo flashes red.
Verify that the “SYSTEM UPGRADE MODE” switch on the
product side panel is in the “OFF” position.
DISPLAY
The monitor connected to the bit Play HD doesn’t
display anything.
•
Make sure the monitor is turned on.
•
Check that the video cable is properly connected.
•
Set a suitable video resolution for the monitor used.
General issues:
- The monitor flashes;
- The image is blurred;
- The image is not scaled to fit the screen;
- The image is not displayed on the monitor.
• Check that the video cable is working and is properly connected.
• Set a suitable video resolution for the monitor used.
AUDIO
You cannot hear the audio signal.
• Verify that the volume of the sound system is set correctly.
• If you use the TOSLINK optical connection, the S/PDIF LPCM
setting from the main menu:
SETTING -> AUDIO -> SPDIF OUTPUT must be active.
Noise is heard while playing songs using the bit
One with TOSLINK input.
• Check the integrity of the optical cable and connections.
• If you are using the bit Play HD with bit One, make sure that
you
are playing files with 48KHz 24-bit resolution MAX. In case
you want to play files with higher resolution, place an SRC
(SAMPLE RATE CONVERTER) between the bit Play HD and
the bit One.
(see section 13.1 of the bit One user’s manual v.1.5d)
USB DEVICE
The bit Play HD does not recognize any USB
storage device.
Verify that the system file of your USB device is NTFS, FAT/
FAT32 or HFS+.
REMOTE CONTROL
The multimedia player remote control
does not work.
• Make sure the batteries are properly installed.
• The batteries may be depleted. Replace them with new batteries.
• Press only one button at a time.
• Verify that the line of sight between the remote and the IR
receiver is not obstructed.
• Make sure that the IR receiver is properly connected to the
bit Play HD.
USER’S MANUAL
bit Play HD /
8
