0611
Verifit User’s Guide Version 2.8
Page 33
7
Hearing Instrument Tests Setup
7.1
Section overview
FastFacts 7.1: Hearing instrument tests setup
7.2
HIT single or dual view
FastFacts 7.2: HIT single or dual view
Except for Input/Output, Battery drain and Manual control screens, you have the
option of selecting either a single, full-screen view or a dual, side by side view.
Some data may be dropped from the dual view.
To change the presentation, highlight, then <PICK> [Single view] or [Dual view].
To switch between A and B test panel in single or dual view, press <Left/Right>.
In dual view, you may switch panels by left-clicking the mouse on a screen button
in the inactive test panel. However, this also operates the button.
The appearance of Hearing Instrument Test (HIT) screens may be changed in
several ways. Most screens may be viewed as a single, full-screen or dual, side by
side panels. Most screens may be formatted to show results in graphical or tabular
format. The Multicurve screen may be scaled in dB SPL or dB Gain. Individual
curves may be hidden (but not erased).
This section covers the following topics:
7.2: HIT single or dual view
7.8: HIT calibration facts
7.3: Graph or table format
7.9: Calibration of HIT reference microphone
7.4: Output or gain scale
7.10: Calibration check for coupler microphone
7.5: Hide or Show HIT curves
7.11: Coupling the hearing instrument
7.6: 1996 or 2003 ANSI standard 7.12: Positioning the hearing instrument
7.7: ANSI test frequencies
