0611
Verifit User’s Guide Version 2.8
Page 22
4.2
Date and time setup
FastFacts 4.2: Date and time setup
4.3
Display settings
FastFacts 4.3: Display settings
4.4
Saving test setup
FastFacts 4.4: Saving test setup
To set the date and time that appears on printouts and calibration screens:
1)
Press <Setup>, then highlight and <PICK> [Date & Time] on the Setup poster.
2)
To change the date, highlight and <PICK> the month window to display a drop-
down list of months.
3)
Highlight and <PICK> the desired month on the list.
4)
Repeat the previous step to change the date, year and time in the appropriate
windows.
5)
When the new date and time information has been set, press <Continue> to
exit.
This feature sets the screen saver timing and the background color used on the
graphic test displays. The screen saver blanks the screen after 60, 90 or 120
minutes of inactivity to prolong the life of the display. The settings apply to both the
internal display and to any connected external monitor.
To change display settings:
1)
Press <Setup>, then highlight and <PICK> [Display].
2)
To change the screen saver timing, highlight and <PICK> the current setting
3)
Highlight and <PICK> the desired screen saver timing from the drop-down list.
4)
To change the background color of the graphic display on the various test
screens, highlight and <PICK> [Color] to toggle between black and white.
5)
Press <Continue> to exit setup.
This feature lets you retain the last-used stimulus type and level for most tests
when the power is turned off. It also lets you retain the last-used target method
and transducer type in Speechmap and Insertion Gain tests.
To enable/disable this feature:
1)
Press <Setup>, then highlight and <PICK> [Test setup]
2)
Highlight and <PICK> [Save test setup] to toggle between Yes and No.
