0611
Verifit User’s Guide Version 2.8
Page 23
5
Networking
5.1
Section overview
FastFacts 5.1: Networking
5.2
Networking requirements
FastFacts 5.2: Networking requirements
The Verifit may be connected to a Windows network by connecting to the rear
connector panel using a Cat 5, RJ-45 cable. For automatic address assignment,
the network must have a Dynamic Host Configuration Protocol (DHCP) server.
For manual addressing, the remote computer must be running Windows 95 or
higher, File and Printer Sharing for Microsoft Networks must be enabled and the
TCP/IP Connection must be configured so that the IP address of the remote
computer is on the same subnet as the Verifit. These settings should be obtained
from your network administrator.
The Verifit may be connected to a Windows network by connecting to the rear
connector panel using a Cat 5, RJ-45 cable. This allows screen images to be
printed on a network printer or on a shared printer on a networked PC. Images
and underlying data may also be saved to a shared folder on a networked PC.
See
6: Printing and Storing Results
for details. The Verifit may also be connected
to a single computer using a network hub. Note that sharing data with NOAH is
done over the serial RS-232 port, not the network connector.
This section covers the following topics:
5.2: Networking requirements
5.3: Networking setup
5.4: Single computer connection
