0611
Verifit User’s Guide Version 2.8
Page 10
1.6
Declaration of EMC compliance for the European Community
FastFacts 1.6: Declaration of EMC compliance for the European Community
The compliances listed in the following table are met with the supplied RECD
transducer, microphones, headphones, mouse and keyboard connected and with
unterminated speaker cables (2), USB cables (2), ethernet cable, parallel printer
cable, serial cable and VGA display cable connected. The connection of other
devices may result in increased emissions.
Guidance and manufacturer’s declaration - electromagnetic emissions
The Verifit is intended for use in the electromagnetic environment specified below.
The user of the Verifit should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Verifit uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class A
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
The Verifit is suitable for use in all
establishments other than domestic and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
