Page 7 of 19
AudioCodes™ MP-104 Gateway Quick Start Installation Guide
August 2004
13.
In the main BootP/TFTP Server screen, select
Clients
from the Services menu or click
the Edit Clients icon (
). The following blank dialog appears. This Client Configura-
tion dialog allows the client (AudioCodes MP-104 gateway) to connect to the server
application for code and configuration updates.
14.
Click the Add New Client icon (
), and configure the settings as described below.
After configuring, the dialog should look like the one shown on the following page.
•
Client MAC:
Enter the MAC address, which can be found on the bottom of the
MP-104 device.
•
Client Name:
Enter the desired name (e.g., mp104).
•
Template:
Select
<none>
.
•
IP:
Obtain the IP address of the MP-104 from your network administrator, and
enter the value in this field.
•
Subnet:
Enter the subnet mask of the MP-104.
•
Gateway:
Obtain the default gateway IP address of the MP-104 from your network
administrator, and enter the value in this field.
•
TFTP Server IP:
Enter the IP address of the computer that the BootP/TFTP
Server application is running.
•
Boot File:
Select
ramMP10X.cmp
from the drop-down list. Then, add the
-fb
switch after the file name (
ramMP10X.cmp -fb
). This switch automatically
burns the
ram.cmp
into the flash memory.
NOTE:
If you do not add the
-fb
switch, the system will not burn the boot file into
the flash memory automatically.
•
INI File:
Select
MP1XXFXO_usa/uk.ini
from the drop-down list.
Add New Client Icon
