Page 13 of 19
AudioCodes™ MP-104 Gateway Quick Start Installation Guide
August 2004
6.
Advanced Configuration:
This page has the Network Settings, Channel Settings, Con-
figuration File, Regional Settings, and Change Password fields.
•
Network Settings:
Configure the Network Settings as described below.
—
IP Address:
Enter the IP address of the MP-104.
—
Subnet Mask:
Enter the subnet mask of the MP-104.
—
Default Gateway Address:
Enter the default gateway address if you are using
a static IP address or need to change the subnet mask or gateway address.
Ensure these values match those on the IPRC Device Configuration page if
using static IP addressing.
— DNS Primary Server IP:
Should be set to
255.255.255.255
.
— DNS Secondary Server IP:
Should be set to
255.255.255.255
.
— Syslog Server IP Address:
Leave this field at default or enter any IP address
of a system that is equipped with a system logging application.
— Enable Syslog:
Should be set to
Disable
.
— RTP Base UDP Port:
Should be set to
4000
.
— RTP IP Diff Serv:
Should be set to
0
.
— RTP IP TOS:
Should be set to
0
.
— RTP IP Precedence:
Should be set to
0
.
— Port 1 Duplex Mode:
Shows the mode that your system is using.
— Port 1 Speed:
Shows the speed that your system is using.
To apply the changes, click
SUBMIT
.
