AudioCodes MP-104, Quick Start Installation Manual

Page: 10 / 19

Page 10 of 19
AudioCodes™ MP-104 Gateway Quick Start Installation Guide
August 2004
Configuring the MP-104
Once the BootP Client is set up, configure the MP-104 in the AudioCodes Web administrator.
To configure the MP-104:
1.
Open the Web browser and enter the IP address of your MP-104 gateway in the Address
field. Then, press
ENTER . The following home page appears.
NOTE:
The IP address can be found in the IP field in the Client Configuration dialog,
shown on page 7 .
2.
When the login dialog box appears, enter the username and password. The default user-
name and password are both
Admin
(case-sensitive). If you are unable to log on, verify
that the Client Configuration is set up correctly (see page 7 ).
3. The MP-104 has the following options:
•
Quick Setup (see page 11 )
•
Protocol Management (see page 12 )
•
Advanced Configuration (see page 13 )
•
Status and Diagnostics (see page 17 )
•
Software Update (see page 18 )
•
Save Configuration (see page 18 )
•
Reset (see page 18 )
To configure the settings, click any of the options and follow the instructions on the fol-
lowing pages.
NOTE:
Make sure that the Call Agent IP address in the Advanced Configuration - Pro-
tocol Management page matches the IPRC IP address (see page 12 ).