AudioCodes Mediant 2600, Quick Setup Manual

Page: 11 / 50

AudioCodes Mediant 2. Installing the Hardware
BroadCloud Hosted UC 11 AudioCodes Mediant CRP
2.2 Mediant 500
Figure 2-7: Front Panel - Ports
Table 2-5: Front Panel
Item # Label Description
1 POWER /
STATUS
LEDs indicating the status of the power and reboot/initialization.
2 // Reset pinhole button to reset and optionally to restore to factory
defaults. To restore to factory defaults: Press and hold down the
pinhole button for at least 12 seconds, but no longer than 25 seconds,
with a paper clip or any other similar pointed object.
3 CONSOLE RJ-45 port for RS-232 serial communication
4 LAN Up to four Gigabit Ethernet (10/100/1000Base-T) ports to connect to
LAN (IP phones, computers, or switches). These ports support half-
and full-duplex modes, auto-negotiation, and straight or crossover
cable detection.
6 USB Two USB 2.0 ports. Do not use.
Figure 2-8: Rear Panel – Earth and Power
Table 2-6: Rear Panel
Item # Label Description
1 Protective earthing screw.
2 I / 0 Power switch ( O is off; I is on).
3 100-240V~50-60Hz 0.8A
Max.
Three-prong AC power supply entry.