BroadCloud Hosted UC
AudioCodes Mediant CRP
32
Document #: LTRT-29836
An example of configured IP network interfaces is shown below:
Figure
4-8: Configured Network Interfaces in IP Interfaces Table
4.2.2
Step 2b: Configure NAT
Only applies if connecting according to
(described
Note:
Configure this setting only if you are behind a firewall NAT.
Note:
The ‘NAT IP Address’ is the Global-IP-address used in front of the firewall facing
the BroadCloud service. If the DMZ holds the global-IP-address (no NAT is performed
by the firewall) and the CRP is already assigned with the Global-IP-address as its
address, skip this NAT configuration.
To configure the Global address
1.
Open the NAT Translation table (
Setup
menu >
IP Network
tab >
Core Entities
folder
>
NAT Translation
).
2.
Click
New
; the following dialog appears:
Figure
4-9: NAT Translation Table - Dialog Box
Summary of Contents for Mediant 2600
Page 2: ......
