AudioCodes Mediant 2600, Quick Setup Manual

Page: 5 / 50

AudioCodes Mediant 1. Introduction
BroadCloud Hosted UC 5 AudioCodes Mediant CRP
1 Introduction
This guide shows how to set up AudioCodes' Cloud Resilience Package (referred to as
CRP in this document) for interworking between BroadCloud's Hosted UC and IP-Phones
and/or ATA devices environment.
1.1 Making BroadCloud Preparations
Before reading and using this Quick Setup Guide , read the BroadCloud Hosted
Survivability Service Definition guide available from the BroadCloud knowledgebase
( info.broadcloudpbx.com ).
Note: The BroadCloud Hosted Survivability Service Definition Guide details how to
provision the Survivability device and the Survivability Users. This guide assumes
you've read that guide and that the required provisioning has been completed.
When provisioning, select the appropriate Shared Device Type:
AudioCodes Mediant Device
Note: If you do not have this device type available in your service offering, contact your
Account Manager who will arrange it for you.
1.2 Component Information
1.2.1 AudioCodes CRP Version
Table 1-1: AudioCodes CRP Version
CRP Vendor AudioCodes
Models

Mediant 500L

Mediant 500

Mediant 800B

Mediant 2600 (Without PSTN connectivity)
Software Version F7.20A.152.003
Protocol

SIP/UDP (to the BroadCloud Hosted UC Service)

SIP/UDP or SIP/TCP (to the IP-Phones and/or ATA devices)
1.2.2 BroadCloud Hosted UC Version
Table 1-2: BroadCloud Version
Vendor/Service Provider BroadCloud
SSW Model/Service
BroadWorks
Software Version 21
Protocol SIP/UDP