BroadCloud Hosted UC
AudioCodes Mediant CRP
48
Document #: LTRT-29836
3.
Enter these values in the 'Parameter Name' and 'Enter Value' fields:
Parameter
Value
CRPGATEWAYFALLBACK
1
(enables CRP Gateway Fallback)
4.
Click the
Apply New Value
button for each field.
A.5.2 Step 5b: Update the CRP Gateway Proxy Set
This section shows how to update the CRP Gateway Proxy Set in order to enable PSTN
Fallback routing.
To update the CRP Gateway Proxy Set configuration:
1.
Open the Proxy Sets table (
Setup
menu >
Signaling & Media
tab >
Core Entities
folder >
Proxy Sets
).
2.
Identify the Proxy Set for the CRP Gateway by the 'Proxy Name' field
PSTNFallback
.
3.
Click the
Proxy Address
link located below the table.
4.
Configure a Proxy Address and port for Proxy Set for CRP Gateway:
Parameter
Value
Index
0
Proxy Address
CRP LAN IP address and port
e.g.
10.15.77.10:5070
Transport Type
UDP
(leave as is)
Figure
A-11: CRP Gateway Proxy Address
5.
Click
Apply
to apply definitions.
Summary of Contents for Mediant 2600
Page 2: ......
