13
Part names and function
• An LED can be in one of five statuses.
(1) Lit: Indicates that a function is selected and enabled, etc.
(2) Off: Indicates that a function is not selected and disabled, etc.
(3) Blinking: Indicates that a function is being selected. Repeats every 500 ms until the status changes.
(4) Blinking fast: Indicates that the operation has been rejected. Repeats blinking five times every 200 ms.
(5) Dimmer lit: Indicates lower brightness.
• The signal level ranges indicated by the SIG/PK LEDs are as follows.
- LED lit (red): 0 dBFS to -5 dBFS
- LED lit (yellow): -6 dBFS to -24 dBFS
- LED lit (green): - 25 dBFS to - 59 dBFS
- LED off: -60 dBFS or less
Rear panel
❻ Grounding screw
The supplied power cable is a 2-core cable, and cannot be used for
grounding. Ground the product as necessary.
❼
NETWORK port
A NETWORK port. Connect an Ethernet cable (Cat5e or above).
❽
USB port
A USB port (USB Type B). Connect a USB cable.
❾
LINK A/B port
A LINK A/B port. Used for Audio-Technica LINK.
Connect an Ethernet cable (Cat5e or above with 24 AWG or larger ;
shielded cable recommended). PoE will be available in a future
software update.
The maximum current supplied is 0.24A per port.
❿
AC inlet
Connect the power cable.
❶
Unbalanced input port (ST)
An unbalanced input port. Connect an unbalanced cable.
Pin assignments are as follows. 1: STEREO R 2: STEREO L and 3:
GND.
❷
Balanced input port (MIC/LINE)
A balanced input port. Connect a balanced cable. The input type
setting (MIC/LINE) can be changed.
Pin assignments are as follows. 1: HOT, 2: COLD, and 3: GND.
❸
Balanced input port (MIC)
A balanced input port. Connect a balanced cable.
Pin assignments are as follows. 1: HOT, 2: COLD, and 3: GND.
❹
Unbalanced output port (UNBAL)
An unbalanced output port. Connect an unbalanced cable.
Pin assignments are as follows. 1: STEREO R/2 2: STEREO L/1 and
3: GND.
❺
Balanced output port (BAL 1/L·2/R)
A balanced output port. Connect a balanced cable.
Pin assignments are as follows. 1: HOT, 2: COLD, and 3: GND.
❶
❸
❷
❹
❼
❺
❻
❽
❾
❿
