55
Key functions
Audio-Technica LINK
Up to six ATDM-0604 model mixers can be daisy-chained so that, as a whole system, it can handle audio inputs from 24 Mic channels, 12 Mic/Line
channels, and 6 unbalanced stereo channels. The proprietary Audio-Technica LINK functionality enables the transmission of low-latency, high-speed
audio bus signals between devices, making it possible to steadily control and transmit uncompressed audio signals. Furthermore, the model offers
excellent workability as it conforms to the Ethernet standards and can be connected to generic LAN cables (shielded cables of Cat5e or above with
the conductor diameter size of 24 AWG or larger are recommended).
Connection and setting procedures
1. Daisy-chain the ATDM-0604 devices (up to six).
• The LINK terminal can be LINK A or LINK B. There is no distinction — and the polarity is not specific — between the two. Therefore, they can be connected in any
combination : A to B, B to A, A to A, or B to B. Taking ease of maintenance after the installation into account, however, it is recommended that the terminals be
connected in the same pattern within the same system.
• Do not connect the devices in a ring pattern. Make sure to leave one of the two LINK terminals at both ends of the daisy-chained ATDM-0604 devices
unconnected.
• For connections, use a LAN cable of Cat5e or above with conductor diameter size of 24 AWG or larger (shielded cables are recommended).
A
B
A
B
B
B
B
A
A
A
Primary
Connection example
Extension
Extension
Extension
Extension
Extension
2. Launch Web Remote, and configure the settings related to the Audio-Technica LINK for each ATDM-0604.
