SOFTWARE
SOFTWARE
Mic Preamp Controls
The Mic preamps on EVO 16 can be remotely controlled from the EVO Software
Mixer. To enable this go to the “View” menu and select “Show Mic Pre Controls”.
Once this is enabled, on the bottom of each channel, you’ll see a gain control
and a +48v button.
Saving and Opening EVO Configurations
If you have a configuration you want to use again in the future then you can save
it as a preset. EVO 16 will save all your settings to allow for speedy recall.
To Save a configuration, go to
File > Save
.
The +48v button will enable phantom power on this channel and the Gain control
will adjust the gains on the EVO 16 itself. Allowing you to make quick changes to
your setup without having to look away from the computer during a busy session.
ADVANCED FEATURES
You can then give the configuration a name and click Save. If you’d like to send
your settings to another computer or EVO 16 user, you can click ‘Export Mixer
Setting to File’ and you can save this to your documents.
