manualshive.com logo in svg

Audient evo 16, User Manual

Share
Download
Audient evo 16 User Manual Download Page 25

SOFTWARE

SOFTWARE

The EVO Software Mixer allows you to completely control your monitoring for 
recording, mixing or content creation. 

Each fader has the following functions:

EVO SOFTWARE MIXER

Pan Control

 

This allows you to monitor the audio on either the left speaker, the right speaker 

or anywhere in between.

Stereo/Mono

 

Adjacent tracks can be stereo linked for when you are recording a stereo source, 

such as a synth or when using stereo mic techniques.

Solo (S)

 

Solo will mute every other input apart from the channels that have the solo 

button selected.

Phase Flip

 

Inverts the polarity of the signal by 180° to stop phase cancellation. This is useful 

if you are micing the rear of a guitar amplifier or the underside of a snare drum.

Meter

 

This shows the current input level of a particular channel. If the signal level is 

too high, a red “Clip” indicator will show at the top of the meter. In this instance, 

you may need to adjust the gain of your inputs or the volumes in your recording 

software.

Mute (M)

 

This will mute the track so it is no longer being monitored.

Summary of Contents for evo 16








































Reviews:

No comments

Brands by name

Popular brands

Load more brands