Audi Q7 2007
!
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 13 – Crankshaft group
6
92
3
Removing and installing crankshaft
3.1
Crankshaft - exploded view of components
When carrying out repairs, secure engine to engine and gearbox support -VAS 6095-
⇒
page 29
.
1 - Crankshaft
"
Measuring axial
clearance
⇒
page 94
"
Measuring radial
clearance
⇒
page 95
"
Do not rotate the
crankshaft when
checking the radial
clearance
"
Crankshaft dimen-
sions
⇒
page 94
2 - Dowel sleeve
"
2 x
"
Insert in cylinder
block
3 - Retaining frame
"
Installing
⇒
Fig. on
page 93
4 - Bolt
"
Renew
"
Tightening se-
quence
⇒
Fig. on
page 93
5 - Thrust washer
"
Only fitted on 3rd
crankshaft bearing
"
Oil grooves face
outwards
"
Note location
"
Measuring axial
clearance of crank-
shaft
⇒
page 94
6 - Bearing shell
"
For retaining frame
"
Do not interchange used bearing shells (mark positions)
"
Bearing shells worn down to nickel layer must be renewed
"
Install new bearing shells for retaining frame with correct coloured markings
⇒
Fig. on page 94
7 - Centring sleeve for torque converter
"
For vehicles with automatic gearbox
⇒
Fig. on page 94
8 - Dowel pin
"
Check that pin is firmly seated in crankshaft
9 - Thrust washer
"
Only fitted on 3rd crankshaft bearing
"
Oil grooves face outwards
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259