Remove bolts - 1 - and - 3 -.
Fig. 107: Removing Ignition Coils Using Ignition Coil Puller T40039
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Pull ignition coils about 30 mm out of spark plug shaft with Puller T40039.
Release electrical connectors and remove them evenly from ignition coils.
Remove spark plugs using spark plug wrench 3122B.
Install new spark plugs.
Installing ignition coils
Loosely place all ignition coils in spark plug shaft.
Align ignition coils to connectors and place all connectors evenly on ignition coils.
Press ignition coils evenly by hand onto spark plugs (do not use a hammer).
Tightening torque
TYPE PLATE, VEHICLE IDENTIFICATION NUMBER (VIN), ENGINE CODE
TYPE PLATE, VEHICLE IDENTIFICATION NUMBER (VIN), ENGINE CODE
Meaning of Vehicle Identification Number (VIN):
Vehicle data sticker
Component
Nm
electrical wiring guide for ignition coils to cylinder head cover
5
Spark plugs in cylinder head
30
WAU
ZZZ
4F0
5
N
000 233
Manufacturer code
Filler characters Model Model year 2003
Production location
Serial number
2008 Audi A6 Quattro
Maintenance Maintenance Procedures
FIXYOURCAR
2:27:41 AM
Page 83
