Switch headlights ON in high beam position.
Realign Beamsetter box with the high beam headlight if necessary.
Set Beamsetter "Scaled wheel" to 0%.
Fig. 77: Identifying Beamsetter "Scaled Wheel" At 0%
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Cover low beam lamp (use hand or small piece of cardboard) and make sure the "hot spot" of high beam
pattern is centered on the square target box of the pattern screen.
If high beam pattern is way out of adjustment:
Inspect for reflector damage.
Replace reflector if needed.
Aligning fog lamp
Switch fog lamps ON.
Align Beamsetter box with fog lamp (make sure it is between 30 and 70cm from the fog lamp lens).
Set Beamsetter scaled wheel to 1.4%.
NOTE:
High beam pattern is built into the reflector design and cannot be adjusted
separately.
NOTE:
Always align headlight in the low beam position.
2008 Audi A6 Quattro
Maintenance Maintenance Procedures
FIXYOURCAR
2:27:40 AM
Page 63
