Vehicle and headlamp adjuster must be aligned.
Ensure headlight adjuster is about 30 cm in front of headlight.
Inclination must be set.
Inclination measurements are stamped in "%" at top of headlamp. The headlamps must be adjusted according to
these measurements. Percentage information is based on a projection distance of 10 meters. For example, with
an inclination measurement of 1.0% (on vehicles with headlamp range adjuster), this converts to 10 cm.
Vehicles with manual headlight range adjuster:
The headlight range adjuster rotary knob must be in basic setting - 0 -.
Vehicles with automatic Headlamp Range Control:
Fig. 64: Connecting Data Link Connector (DLC)
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Connect Vehicle Diagnosis, Testing and Information System VAS 5051 using the diagnostic cable VAS
5051/5 with ignition switched off.
Switch ignition on.
NOTE:
To check/adjust headlights, they must always be placed in the basic
setting with the VAS 5051.
Perform basic setting with the Vehicle Diagnosis, Testing and Information
System VAS 5051 :
2008 Audi A6 Quattro
Maintenance Maintenance Procedures
FIXYOURCAR
2:27:40 AM
Page 53
