surface
Break-away point - 2 - between left horizontal part and rising part on right of light-dark border must run
vertically through central point - 3 -. Bright core of light beam must be right of vertical line
Fig. 66: Identifying 15 Degree Angle
Courtesy of VOLKSWAGEN UNITED STATES, INC.
For the previous test screen with 15 ° -setting line, adjust as for new test screen. To avoid incorrect
settings, ignore 15 ° setting line.
Headlamps, adjusting
Fig. 67: Identifying Headlight Adjustment Screws
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Main headlight (left)
NOTE:
To make it easier to find break-away point - 2 - cover and uncover left half
of headlamp (as viewed when looking forward) a few times. Next, check
low beam again.
After correct adjustment of dipped beams the center point of the main
beam must lie on the center mark - 3 -.
2008 Audi A6 Quattro
Maintenance Maintenance Procedures
FIXYOURCAR
2:27:40 AM
Page 55
