Fluid level must be at MAX mark
Inspection service
When driving, fluid level drops slightly from use and automatic brake pad adjustment.
Always check fluid level in conjunction with brake pad wear:
When brake pads are new or if there is still enough brake lining left, the brake fluid level must be
between MIN and MAX marks.
With brake fluid at MIN mark or slightly above, topping off brake fluid is not necessary when wear limit
of brake pads has been almost reached.
DIGITAL TV TUNER: ASSIGN REMOTE CONTROL KEY FOB
ELSA: Vehicle electrical - Installation guide, Digital TV Tuner
CHECK VEHICLE KEY FUNCTION
Separate keys so that the function of each key can be checked individually.
Mechanically lock and unlock vehicle with keys on drivers door.
Insert keys in ignition and start engine one after the other.
If engine switches off by itself after about 3 seconds and "SAFE" appears in the odometer display, the key
has not been programmed to the immobilizer.
Repair measures: Guided Fault Finding (Programming vehicle keys).
Note number of checked and delivered vehicle keys in delivery protocol.
DTC MEMORY, INTERROGATING WITH VEHICLE DIAGNOSIS, TESTING AND
INFORMATION SYSTEM VAS 5051/5052
Follow these steps in sequential order.
NOTE:
To prevent the brake fluid from overflowing from the reservoir, the level
must not be over the MAX mark.
WARNING:
If brake fluid level is below MIN mark, check brake system (repair
procedure), before adding brake fluid.
2008 Audi A6 Quattro
Maintenance Maintenance Procedures
FIXYOURCAR
2:27:39 AM
Page 20
