Position wiper arm with wiper blade attached on wiper axle and adjust wiper arm on windshield as
follows:
Dimension - a - = 5 to 15 mm.
Dimension - b - = 30 to 40 mm.
Tightening torque
Rear window work sequence
Let wiper motor run to end position.
Switch ignition off and remove ignition key.
Fig. 72: Identifying Cover
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Carefully spread cover - arrows - and lift.
NOTE:
The dimensions give the distance of the wiper blade point to the black
cowl panel grille on lower edge of windshield.
Tighten wiper arm nuts.
Switch ignition on.
Activate mist wipe and let wiper arm travel to end position.
Switch ignition off.
Check wiper arm adjustment again, correct if necessary.
Component
Nm
Wiper arm nut
15
2008 Audi A6 Quattro
Maintenance Maintenance Procedures
FIXYOURCAR
2:27:40 AM
Page 59