background image

1

Form No. 3105849.016   6/94
©1994 The Dometic Corp.
LaGrange, IN  46761

USA
SERVICE OFFICE
The Dometic Corp.
509 So. Poplar St.
LaGrange, IN 46761

CANADA
Dometic Dist.
866 Langs Dr.
Cambridge, Ontario
CANADA N3H 2N7

OPERATING INSTRUCTIONS

8300

MODEL

by Dometic

Fabric Roller Tube Assembly

with Universal Hardware

®

Summary of Contents for 8300

Page 1: ...Grange IN 46761 USA SERVICE OFFICE The Dometic Corp 509 So Poplar St LaGrange IN 46761 CANADA Dometic Dist 866 Langs Dr Cambridge Ontario CANADA N3H 2N7 OPERATING INSTRUCTIONS 8300 MODEL by Dometic Fabric Roller Tube Assembly with Universal Hardware ...

Page 2: ...y pull sideways on the rafter and slide it to the top of the support arm Place downward force on main support arm to remove slack from fabric and tighten black adjustment knob on the rafter arm Repeat for other side FIG 4 5 Reposition the pull strap out of the way by sliding it down thefabricrollertubeassemblytowardtheright sameend as the Safe T Lock Wrap the strap around the main support arm FIGS...

Page 3: ...TION DO NOT DRIVE THE STAKES HOME AS IT WILL BE DIFFICULT TO PULL THEM OUT AND MAY DAMAGETHEAWNINGFOOT Repeat this step on the other side to complete the patio position setup FIG 8 8 CAUTION Whenever heavy or prolonged rain or wind is anticipated or you will leave the awning unattended itisbesttoclosetheawning Damageas a result of weather is not covered by warranty TO CLOSE 1 FROM PATIO POSITION R...

Page 4: ... wet while rolled up as soon as conditions allow roll it out and let it dry before rolling it up again This will help prevent mildew and rotting Mildew does not form on the fabric itself but on the accumulated dust dirt and grime Periodically clean fabric with genuine A E CANOPY CLEAN Always make sure the awning is extended high enoughbeforeopeningentrydoor ApplyA EGO EASY spraylubricantasneededto...

Reviews: