35
G
e
tti
n
g R
e
a
d
y
Slide the au Micro IC Card (LTE) in the
direction of the arrow away from the
portion shown in the figure with a fingertip
Gently support the
portion shown in
the figure of the au Micro IC Card (LTE) with
a fingertip and slide out the au Micro IC Card
(LTE) in the direction of the arrow
◎
Be sure to use a finger to remove the au Micro IC Card (LTE). Using
a sharp object such as the tip of a ballpoint pen may cause the
IC card terminal on the G’zOne or the au Micro IC Card (LTE) to
malfunction or become damaged.
◎
If the au Micro IC Card (LTE) is difficult to remove because of, for
example, oily skin, wipe your fingertips and then try again.
Attaching the au Micro IC Card (LTE)
Turn off the power and remove the battery
pack before removing the au Micro IC Card
(LTE).
For how to remove the battery pack, refer to “Attaching/
Removing the Battery Pack” (
▶
P.32).
Insert a finger in the direction of the arrow in
the figure and open the stopper
Stopper
Hold the au Micro IC Card (LTE) so that the
IC surface is facing downward, confirm the
position of the cutout, and then insert the au
Micro IC Card (LTE) beneath the guide in the
direction of the arrow to push and slide it all the
way in while gently pressing from above
Push the stopper closed until it clicks
Cutout
Stopper
Guide