10
S
a
fe
ty
Pr
e
c
a
u
tio
n
s
/N
o
te
s o
n
W
a
te
rp
ro
o
f a
n
d D
u
s
tp
ro
o
f
Part
Material
Surface treatment
External connection jack cover
PC resin/
Elastomer resin
Acrylic UV hard coating
Earpiece cover
PC resin
Acrylic UV hard coating
Microphone/Speaker cover
PC resin
Acrylic UV hard coating
Side Key (volume UP/DOWN)
PC resin
Acrylic UV hard coating
Power Key
PC resin
Acrylic UV hard coating
Photo light/Infrared port cover
PMMA resin
Hard coating
Lens cover
PMMA resin
Hard coating
Lens ring
PC resin
Acrylic UV hard coating
TV antenna tip cover
ABS resin
Surface texturing
TV antenna origin Joint
Stainless steel
Nickel plating
Screw
Stainless steel
Chromium plating
Charging terminal
Stainless steel
Gold plating
Do not bring the product close to magnetized objects such as cash
cards, floppy disks, credit cards, and prepaid cards. Doing so might
result in loss of recorded information.
Use the product with the covers of external connection jack and
earphone jack closed. If the covers are open, dirt or water may get
inside causing a fault.
Do not allow liquids, metal objects, burnable items, or other foreign
matter to get inside the external connection jack, earphone jack,
or microSD memory card slot. Failure to do so might cause a fire,
electric shock, or a fault. Be sure to cover the external connection
jack and earphone jack when not using them to prevent dust and
other objects from getting inside.
Do not swing the product around by holding the earphone (sold
separately) or hand strap, etc. Doing so might cause injury, accident,
malfunction or damage. Do not use a damaged hand strap.
Stow the TV antenna when not watching TV (1Seg). If you operate the
product for calling, etc. with the TV antenna extended, it might cause
unexpected injury by hitting your face, etc.
Do not fold the TV antenna or swing the product with the TV antenna
extended. Doing so might cause injury or deform or damage of the
TV antenna.
Pay attention to items becoming stuck to the main unit. The earpiece,
speaker uses magnets, and so thumbtacks and pins, craft knife
blades, staples, and other metal objects sometimes become stuck to
the main unit, and cause unexpected injury. Before using the product,
be sure to check that there are no foreign objects on the earpiece,
speaker or other parts.
Do not put the product directly on sand at a beach, etc. Sand or other
small particles might get inside the microphone, earpiece or speaker,
causing the volume to drop. If sand gets inside the product’s main
unit, it might cause overheating or a fault.
If you have a weak heart, be careful when setting the incoming
vibration and ringtone volume. They might affect heart.
When using the product for calling, data communication or watching
TV (1Seg), be careful not to keep the product in direct contact with
your skin for a prolonged period, or not to cover the product with
paper, cloth, bedding, etc. Doing so might cause fire, burns or a fault.
When attaching a microSD card, push it in the specified direction until
the lock is engaged. Do not release your finger suddenly as the card
may fly out. When removing the microSD card, push it in the same
direction until the lock disengages. Do not move your face close to
the card. The card may fly out quickly resulting in injury or damage.
When using the compass bearing function, large discrepancies may
occur in the measurement results depending on the measurement
location. Be particularly careful when measuring inside buildings
or moving objects or near permanent magnets (such as magnetic
necklaces), high-voltage wires, overhead wires, metal (such as steel
desks or lockers), and home electronics (such as TVs, computers,
and speakers).
