7. ATC Virtual Controller Emulator
7.3. Selecting Timed vs Continuous Mode
There are two modes, Continuous and Timed. To change between modes simply
click the button corresponding to the mode you would like top be in. After
clicking, the black dot ( as seen below) will be on the current mode.
In the example above, the dot is on the Timed mode showing use that we are
operating in Timed Mode.
Differences in modes:
Timed:
Timed mode operates similarly to a test. When selected, a panel
will appear to enter the duration of the timed test(shown below).
When the
button is pressed, all selectable
items will be disabled for the duration of the test. There will also be a
time remaining counter so you can see time remaining for test to
complete. When the test completes, a report will be generated with a
pass fail result and will be displayed.
Continuous:
In continuous mode you can select any frames and their
status at any time. You can also select/deselect what devices you are
emulating at any time.
TVC-3800 User's Manual, Rev. 1.0
37
