7. ATC Virtual Controller Emulator
7.5. Running ATC Virtual Controller Emulator
Make sure the Interface Software and the TVC-3800 USB driver are installed
and TVC-3800 is connected to the SDLC of the BIU device using cable with
YELLOW
heatshrink and also connected to a USB port of the computer. The
POWER indicator on the TVC-3800 should be ON.
Start the ATC Virtual Controller Emulator software.
When the software opens, click the settings button to select which frames you
would like to appear on the main window. In the main window select which
mode you would like to run in and put a checkbox by which frame(s) you would
like to simulate. If in timed mode enter the time duration of the test.
Ensure that the SIU device is supplied power.
When you press connect the TVC-3800 will begin to send the selected frames to
your SIU device.
TVC-3800 User's Manual, Rev. 1.0
39
