5. ATC Virtual Cabinet Emulator
Input/Output Functionality SIU's Present SIU Loop Call Inputs
Detailed description of each section:
Tool Bar
has the following controls available:
Connect
button. Click this button to connect the interface
software to the virtual cabinet TVC-3800.
Disconnect
button. Click this button to disconnects the
interface from the virtual cabinet TVC-3800.
Layout
button. Click this button to open interactive
intersection layout viewer.
About
button. Click this button to view the contact information,
the software version, and the firmware version.
Help
button. Click this button to open the ATC Virtual Cabinet
Help window.
Signals
section displays the current state of the signals.
CMU Selection and Configurations
section allows you to select how many
CMU's you want to be present, and load their configurations.
SIUs Present
section shown which SIUs are enabled in the controller. When
an SIU is detected as present, it will then enable you to Select loop calls for
that SIU.
Loop calls can be activated or deactivated in
SIU Loop Call Inputs section
.
To activate a loop call, check the corresponding checkbox. To deactivate a
loop call uncheck the corresponding checkbox. If the checkbox is disabled,
the corresponding SIU is not enabled in the Controller Unit.
22
TVC-3800 User's Manual, Rev. 1.0
