MAN - BBR3 - REV: Original | F. Troubleshooting
43
2. If the LVDT shaft appears to be centered in the LVDT, re-secure the cover and contact ATS for assistance.
3. If you determine that the shaft is misaligned, attempt to center it by performing the steps below.
• Loosen the four retainer screws using a 3/32-inch Allen wrench.
• Continue to shine the flashlight on the lower end of the LVDT shaft, while carefully adjusting the housing with the
other hand. Position the LVDT housing so the shaft is in the center of the LVDT housing.
CAUTION: Never attempt to adjust the LVDT shaft. If the shaft becomes damaged, the load frame will
not produce accurate results.
CAUTION: The load cell can be easily damaged, especially from side loading and excessive torque.
DO NOT place Load Frame on its side when the Load Cell is in place. Doing so will result in damage
to the Load Cell.
Figure F.1 - LVDT Shaft
View LVDT here
Shine light here
