manualshive.com logo in svg

ATS BBR3, Instruction Manual

Share
Download
ATS BBR3 Instruction Manual Download Page 26

MAN - BBR3 - REV: Original | D. Installation

21

 

Load frame hook ups pre-wired and color coded:

•  RED > LVDT
•  BLUE > Load Cell
•  GRAY > Light 

WARNING: The cable for the lights should be connected to the load frame at all times while the BBR3 

is in use. The electrical grounding for the load frame to the BBR3 chassis is done through the light 

cable.

 

1. Connect the air hose to the ports on the rear of the 

load frame assembly and to the ports at the rear of 

base unit. The air supply connections supply a minimum 

of 60psi of clean, dry air. Make sure the location of 

air hoses are such that they will not snag or catch on 

anything in the surrounding environment.

2. Connect the chiller RTD cable from the rear of the 

base unit to the refrigeration unit. 

3. Connect the color-coded electrical cables from 

the rear of the base unit to the rear of the load frame 

assembly.

4. Connect the Chiller Communication Cable between 

the Chiller Communication Port on the rear of the BBR3 

Chassis and the RS-485 Port on the rear of the Chiller. 

5. Plug the power cables from the base unit and the refrigeration unit into a surge-protected power source of 

appropriate voltage. Refer to the data tag on the BBR3 base unit.

6. Connect printer if desired using the USB port located in the rear of the BBR3 base. 

Figure D.11 - Load Frame Hook Ups

Figure D.12 - Chiller Communication Cable 

in RS-485 Port.

Figure D.13 - Chiller Communication Cable in 

BBR3 Chiller Communication Port.

Summary of Contents for BBR3
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands