34
MAN - BBR3 - REV: Original | E. Operation
Saving Test Parameters
The “Save” button will save all the current screen data to the currently selected test specification.
This should be done any time you change anything that you want to keep.
If you exit this screen without pressing
SAVE you will lose any changes you have made.
Copying a Test
The “Copy” button is used to make a copy of a test specification under a new name. This is useful if you wish to make
a new test with only a couple of changes from a currently save test.
Remember to press SAVE once you have the changes you want.
If you exit this screen without pressing SAVE
you will lose any changes you have made.
Creating a New Test
The “New” button will create a new test using default test specification values. Remember to press “Save” once you
have created a new test, even if you have not changed anything so that it is saved.
Deleting a Test
The DELETE button will delete a saved test. Once pressed, a pop up will require you to verify that you want to delete
the test. If you answer YES the test cannot be recovered.
Adding Report Images
The REPORT IMAGES button allows you to select images that are printed on the report that this test generates.
When pressed it will display the dialog seen in Figure E.11, which will allow you to select each image.
Figure E.11 - Add images to test dialog
