manualshive.com logo in svg

ATS BBR3, Instruction Manual

Share
Download
ATS BBR3 Instruction Manual Download Page 45

40

MAN - BBR3 - REV: Original | E. Operation

You can also click on either end of any of the scales to change that value to zoom in on just part of the graph. Keep in 

mind that pressing the TIME switch will reset this.

E.9 Diagnostics

When you press the DIAGNOSTICS button the screen in Figure E.19 will be shown.

You should not have permission for this screen unless you are experienced with the machine and what it does.

There are no safety features in this screen. It should mostly be use for maintenance to trouble shoot I/O problems.

The diagnostics button will not be shown on the main menu unless the currently logged in user has permission for 

this screen.

Analog Inputs AI1, AI2, and AI3 

Raw voltages into the system. You should be able to use a voltmeter to test the voltage at the input pin and it should 

match what is shown here. AI1 is deflection, AI2 is load, and AI3 is not used on a mechanical chiller system.

Analog Outputs AO1 and AO2

Raw voltages out of the system. Use a voltmeter to test the voltage at the output pin and verify that it matches the 

value shown on the diagnostics screen. 

Digital Inputs 1, 2, 3, and 4 

Raw values into the system. Use a voltmeter to test the state at the input pin and verify that it matches the value 

shown on the diagnostics screen. The BBR3 does not currently use any of the digital inputs.

Figure E.19 - Diagnostics main software screen

Summary of Contents for BBR3
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands